How to Make Antler Lamps

Friday, July 3rd, 2009 Subscribe To Our Feed

How to make Antler lamps may be interested for some people who like art especially on the home decor. An antler lamp is a kind of lamp which is made from the antlers which animals such as deer and elks shed. The larger antler lamps the more impressive can be found on it. So if you are interested about how to make the antler lamps, there is a deer antler lamps that may give you a good inspiration. You can also look around to find a handmade antler lamp to get the beauty of the animal’s natural antlers along with a light in your home.

Knowing how to make antler lamps is easy but creating your own authentic deep antler lamp is much more thrifty than shelling out the cash for the alluring novelty lamp. The most time consuming and perhaps the most expensive step in creating a deer antler lamp is finding the antlers you will use. You may also decide to visit a local flea market, but you have to be sure to pick only antlers in good condition for use as lamp shafts. You don’t want to use antlers that have broken tips or have been chewed up by a dog or wild animal.

If the thought of how to make antler lamps sounds cruel, it’s not. You can see that deer and moose shed their antlers annually, like humans shed hair and skin. You’ll need a good eye for arranging the antlers and a solder gun to connect everything. Before you know it, you’ll be lighting up a corner of a room with your handmade antler art.

Below is a tip of how to make antler lamps:

1. Choose an get clean interior linings of the antlers then coat the exterior surface of the antlers with lacquer or polyurethane. Each coat must be dry thoroughly between applications.

2. Create a pleasing arrangement by stacking the antlers in various configurations. Hold the light socket in place by putting one large inverted antler near the top of the stack. Drill a hole into the other side of the antler to serve as a portal for the lamp cord. To hold the lampshade, another antler must get position at a slightly taller angle.

3. Use rubber bands, bungee cords or wire to hold the stack in place as you rearrange the antlers. Install the socket at the top of the lamp and feed the cord through the antler via the exit hole, pulling it gently until all of the cord is revealed.

4. Be sure the antlers holding the socket and shade are at the center of the stack. To get this one, use a soldering gun and solder to attach individual antlers to the stack. Once you have connected the antler cluster, cut away the rubber bands or remove the cords or wire.

5. After you check and feel that is good, you then screw a light bulb into the socket. Position the lampshade on top of the bulb and turn on the lamp. So now you have a nice antler lamp you want.

There must be varying forms of how to make antler lamps themselves. Each antler is slightly varied than any other, so each antler lamp is a unique treasure and works wonderfully for rustic lighting. Generally, lamp makers simply glue the antlers together but may of them lash the antlers together with rawhide thong for a western look. A natural look can be found by a combination of glue. You can try making antler lamps with rawhide lamp shades in your home to create true rustic charm and to give it that warm, inviting look and feel that everybody loves.

To know more about how to make antler lamps, see : Antler Lamps

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.